Product information
This repair kit is intended for use on inflatable boats made of PVC.
Everything comes packaged in a plastic box with a screw lid.
Contains:
- 2 PVC patches (220 x 120 x 1 mm) in the colors gray and blue
- 1 tube of glue
Repairing small holes:
1. Repairing a small hole or tear can be done with a patch from the repair kit
2. All surfaces must be clean and dry
3. Apply an even layer of glue to both the boat and the patch. Wait approx. 5 minutes between each layer. Wait 10-15 minutes after the 3rd layer, and place the patch over the hole
4. Use a hard object to push the patch towards the boat
5. Wait at least 24 hours before inflating the boat
Repairing large holes:
It is recommended that the boat be returned to the dealer
- Choosing a selection results in a full page refresh.
!